An Augmented Common Weight Data Envelopment Analysis for Material Selection in High-tech Industries

Document Type : Research Paper

Authors

1 School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran

2 Department of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran

Abstract

Material selection is a challenging issue in manufacturing processes while the inappropriate selected material may lead to fail the manufacturing process or end user experience especially in high-tech industries such as aircraft and shipping. Every material has different quantitative and qualitative criteria which should be considered simultaneously when assessing and selecting the right material. A weighted linear optimization method (WLOM) in the class of data envelopment analysis which exists in literature is adopted to address material selection problem while accounting for both qualitative and quantitative criteria. However, it is demonstrated the adopted WLOM method is not able to produce a full ranking vector for the material selection problems borrowed from the literature. Thus, an augmented common weight data envelopment analysis model (ACWDEA) is developed in this paper with the aim of eliminating deficiencies of WLOM model. The proposed ACWDEA is able to produce full ranking vector in decision making problems with less computational complexities in superior to the WLOM. Two material selection problems are solved and results are compared with WLOM and previous methods. Finally, the robustness and effectiveness of the proposed ACWDEA method are evaluated through Spearman’s correlation tests.

Keywords

Main Subjects


Athawale, V. M., Kumar, R., & Chakraborty, S. (2011). Decision making for material selection using the UTA method. The International Journal of Advanced Manufacturing Technology, Vol. 57(1-4), pp. 11-22. 
Cavallini, C., Giorgetti, A., Citti, P., & Nicolaie, F. (2013). Integral aided method for material selection based on quality function deployment and comprehensive VIKOR algorithm. Materials & Design, Vol. 47, pp. 27-34.
Chatterjee, P., Athawale, V. M., & Chakraborty, S. (2009). Selection of materials using compromise ranking and outranking methods. Materials & Design, Vol. 30(10), pp. 4043-4053.
Chatterjee, P., Athawale, V. M., & Chakraborty, S. (2011). Materials selection using complex proportional assessment and evaluation of mixed data methods. Materials & Design, Vol. 32(2), pp. 851-860.
Chatterjee, P., & Chakraborty, S. (2012). Material selection using preferential ranking methods. Materials & Design, Vol. 35, pp. 384-393.
Chauhan, A., & Vaish, R. (2012). Magnetic material selection using multiple attribute decision making approach. Materials & Design, Vol. 36, pp. 1-5.
Cicek, K., Celik, M., & Topcu, Y.I. (2010), An integrated decision aid extension to material selection problem. Materials & Design, Vol. 31.9, pp. 4398-4402.
Cook, W. D., Kress, M., & Seiford, L. M. (1993). On the use of ordinal data in data envelopment analysis. Journal of the Operational Research Society, pp. 133-140.
Cook, W. D., Kress, M., & Seiford, L. M. (1996). Data envelopment analysis in the presence of both quantitative and qualitative factors. Journal of the Operational Research Society, pp. 945-953.
Crilly, N., Moultrie, J., & Clarkson, P. J. (2004). Seeing things: consumer response to the visual domain in product design. Design studies, Vol. 25(6), pp. 547-577.
Darji, V. P., & Rao, R. V. (2014.a). Intelligent Multi Criteria Decision Making Methods for Material Selection in Sugar Industry. Procedia Materials Science, Vol. 5, pp. 2585-2594.
Deng, Y. M., & Edwards, K. L. (2007). The role of materials identification and selection in engineering design. Materials & design, Vol. 28(1), pp. 131-139.
Edwards, K. L. (2005). Selecting materials for optimum use in engineering components. Materials & design, Vol. 26(5), pp. 469-473.
Girubha, R. J., & Vinodh, S. (2012). Application of fuzzy VIKOR and environmental impact analysis for material selection of an automotive component. Materials & Design, Vol. 37, pp. 478-486.
Hatefi, S. M., Torabi, S. A., & Bagheri, P. (2014). Multi-criteria ABC inventory classification with mixed quantitative and qualitative criteria. International Journal of Production Research, Vol. 52(3), pp. 776-786.
Hatefi, S. M., & Torabi, S. A. (2010). A common weight MCDA–DEA approach to construct composite indicators. Ecological Economics, Vol. 70(1), pp. 114-120.
Jahan, A., Mustapha, F., Ismail, M. Y., Sapuan, S. M., & Bahraminasab, M. (2011). A comprehensive VIKOR method for material selection. Materials & Design, Vol. 32(3), pp. 1215-1221.
Jahan, A., & Edwards, K. L. (2015). A state-of-the-art survey on the influence of normalization techniques in ranking: Improving the materials selection process in engineering design. Materials & Design, Vol. 65, pp. 335-342.
Jahan, A., Bahraminasab, M., & Edwards, K. L. (2012). A target-based normalization technique for materials selection. Materials & Design, Vol. 35, pp. 647-654.
Jahan, A., & Edwards, K. L. (2013). VIKOR method for material selection problems with interval numbers and target-based criteria. Materials & Design, Vol. 47, pp. 759-765.
Jee, D. H., & Kang, K. J. (2000). A method for optimal material selection aided with decision making theory. Materials & Design, Vol. 21(3), pp. 199-206.
Kumar, R., & Singal, S. K. (2015). Penstock material selection in small hydropower plants using MADM methods. Renewable and Sustainable Energy Reviews, Vol. 52, pp.240-255.
Khabbaz, R. S., Manshadi, B. D., Abedian, A., & Mahmudi, R. (2009). A simplified fuzzy logic approach for materials selection in mechanical engineering design. Materials & Design, Vol. 30(3), pp. 687-697.
Liu, H. C., You, J. X., Zhen, L., & Fan, X. J. (2014). A novel hybrid multiple criteria decision making model for material selection with target-based criteria. Materials & Design, Vol. 60, pp. 380-390.
Mahmudi, H., Manshadi, B. D., & Mahmudi, R. (2000). Materials selection for the wing structure of a Human-Powered Aircraft (HPA). In Proceeding of first international and third biennial conference of aerospace engineering, Tehran, Iran, pp. 1405-1413.
Mayyas, A., Shen, Q., Mayyas, A., Shan, D., Qattawi, A., & Omar, M. (2011). Using quality function deployment and analytical hierarchy process for material selection of body-in-white. Materials & Design, Vol. 32(5), pp. 2771-2782.
Milani, A. S., Shanian, A., Lynam, C., & Scarinci, T. (2013). An application of the analytic network process in multiple criteria material selection. Materials & Design, Vol. 44, pp. 622-632.
Milani, A. S., Shanian, A., Madoliat,s R., & Nemes, J. A. (2005). The effect of normalization norms in multiple attribute decision making models: a case study in gear material selection. Structural and multidisciplinary optimization, Vol. 29(4), pp. 312-318.
Milani, A. S., & Shanian, A. (2006). Gear material selection with uncertain and incomplete data. Material performance indices and decision aid model. International Journal of Mechanics and Materials in Design, Vol. 3(3), pp. 209-222.
Rao, R. V., & Davim, J. P. (2008). A decision-making framework model for material selection using a combined multiple attribute decision-making method. The International Journal of Advanced Manufacturing Technology, Vol. 35(7-8), pp. 751-760. 
Shanian, A., & Savadogo, O. (2006.a). A material selection model based on the concept of multiple attribute decision making. Materials & Design, Vol. 27(4), pp. 329-337.
Shanian, A., & Savadogo, O. (2006.b). TOPSIS multiple-criteria decision support analysis for material selection of metallic bipolar plates for polymer electrolyte fuel cell. Journal of Power Sources, Vol. 159(2), pp. 1095-1104.
Shanian, A., & Savadogo, O. (2006.c). A non-compensatory compromised solution for material selection of bipolar plates for polymer electrolyte membrane fuel cell (PEMFC) using ELECTRE IV. Electrochimica Acta, Vol. 51(25), pp. 5307-5315.
Sheskin, D. J. (2003). Handbook of parametric and nonparametric statistical procedures. crc Press. Torabi, S. A., & Shokr, I. (2015). A common weight data envelopment analysis for materials selection. International Journal of Engineering-Transactions C: Aspects, Vol. 28(6), pp. 913-921.
Van Kesteren, I. E. H., Stappers, P. J., & De Bruijn, J. C. M. (2007). Materials in products selection: tools for including user-interaction in materials selection. International journal of sedign, Vol. 1(3).
Zhu, J. (2003). Imprecise data envelopment analysis (IDEA): A review and improvement with an application. European Journal of Operational Research, Vol. 144(3), pp. 513-529.
Zhou, P., Ang, B. W., & Poh, K. L. (2007). A mathematical programming approach to constructing composite indicators. Ecological economics, Vol. 62(2), pp. 291-297.