Digital Supply Chain Management: A Comprehensive Review Using Cluster Analysis, with Future Directions and Open Challenges

Abdalla, S., and Nakagawa, K. (2021). The interplay of digital transformation and collaborative innovation on supply chain ambidexterity. Technology Innovation Management Review, Vol 11(3).

Abouessouror, C., and Benhida, K. (2020). Proposal of a preliminary audit approach for the modeling and digitization of a green supply distribution chain. Paper presented at the Proceedings of the International Conference on Industrial Engineering and Operations Management, pp. 2692-2696.

Afanasyev, V. Y., Lyubimova, N. G., Ukolov, V. F., andShayakhmetov, S. R. (2019). Digitalization of energy manufacture: Infrastructure, supply chain strategy and communication. International Journal of Supply Chain Management, Vol 8(4), pp. 601-609.

Agrawal, T. K., Kalaiarasan, R., Olhager, J., and Wiktorsson, M. (2022). Supply chain visibility: A Delphi study on managerial perspectives and priorities. International Journal of Production Research, pp. 1-16.

Ali, H., and Shoaib, M. (2023). A comprehensive literature review on green supply chain management: recent advances and potential research directions. International Journal of Supply and Operations Management, Vol 10(1), pp. 57-75.

Al-Hyari, K. (2020). Initial empirical evidence on how Jordanian Manufacturing S.M.E.s cope with the covid-19 pandemic. Academy of Strategic Management Journal, Vol 19, pp. 1-12.

Arcidiacono, F., Ancarani, A., Di Mauro, C. and Schupp, F. (2022), "The role of absorptive capacity in the adoption of Smart Manufacturing", International Journal of Operations and Production Management, Vol 42 (6), pp. 773-796.

Ayabakan, M., and Yilmaz, E. (2019, August). Digitalization of the kanban system. In 2019 Portland International Conference on Management of Engineering and Technology (PICMET), 1-10. IEEE.

Babenko, I. V., Anisimov, A. Y., Melnikov, V. Y., Kubrak, I. A., Golubov, I. I., and Boyko, V. L. (2020). Sustainable supply chain management in city logistics solutions. International Journal of Supply Chain Management, Vol 9(2), pp. 1081-1085.

Baral, M.M., Mukherjee, S., Nagariya, R., Singh Patel, B., Pathak, A. and Chittipaka, V. (2022), "Analysis of factors impacting firm performance of M.S.M.E.s: lessons learnt from COVID-19", Benchmarking: An International Journal, ahead-of-print, ahead-of-print. https://doi.org/10.1108/BIJ-11-2021-0660

Begum, H., Abbas, K., Alam, A.S.A.F., Song, H., Chowdhury, M.T. and Abdul Ghani, A.B. (2022), "Impact of the COVID-19 pandemic on the environment and socioeconomic viability: a sustainable production chain alternative", Foresight, Vol 24 (3), pp. 456-475

Bejlegaard, M., Sarivan, I.-M. and Waehrens, B.V. (2021), "The influence of digital technologies on supply chain coordination strategies", Journal of Global Operations and Strategic Sourcing, Vol 14 (4), pp. 636-658.

Boateng, S.L. (2022). Influencer Marketing: A Bibliometric Analysis of 10 Years of Scopus-Indexed Research. In: Boateng, R., Boateng, S.L., Anning-Dorson, T., Olumide Babatope, L. (eds) Digital Innovations, Business and Society in Africa. Advances in Theory and Practice of Emerging Markets. Springer, Cham. https://doi.org/10.1007/978-3-030-77987-0_7.

Bodendorf, F., Lutz, M., Michelberger, S. and Franke, J. (2022), "An empirical investigation into intelligent cost analysis in purchasing", Supply Chain Management, Vol 27 (6), pp. 785-808.

Butollo, F. (2021). Digitalization and the geographies of production: Towards reshoring or global fragmentation? Competition and Change, Vol 25(2), pp. 259-278.

Büyüközkan, G., and Göçer, F. (2018). Digital Supply Chain: Literature review and a proposed framework for future research. Computers in Industry, Vol 97, pp. 157-177.

Caiado, R. G. G., Scavarda, L. F., Gavião, L. O., Ivson, P., de Mattos Nascimento, D. L., and Garza-Reyes, J. A. (2021). A fuzzy rule-based industry 4.0 maturity model for operations and supply chain management. International Journal of Production Economics, 231, 107883.

Chauhan, C., and Singh, A. (2019). A review of Industry 4.0 in supply chain management studies. Journal of Manufacturing Technology Management, Vol 31(5), pp. 863-886.

Chauhan, C., Singh, A., and Luthra, S. (2021). Barriers to industry 4.0 adoption and its performance implications: An empirical investigation of emerging economy. Journal of Cleaner Production, Vol 285, 124809.

Chauhan, P., Choudhary, A., and Padiya, A. Digital transformation challenges in supply chain management: A case study of alpine biomedical.

Cherviakova, V., and Cherviakova, T. (2018). Value Opportunities for Automotive Manufacturers in Conditions of Digital Transformation of the Automotive Industry. Journal of Applied Economic Sciences, Vol 13(8).

Cifone, F. D., Hoberg, K., Holweg, M., and Staudacher, A. P. (2021). ‘Lean 4.0’: How can digital technologies support lean practices? International Journal of Production Economics, 241, 108258.

Cozmiuc, D., and Petrisor, I. (2018). Industrie 4.0 by siemens: steps made next. Journal of Cases on Information Technology (J.C.I.T.), Vol 20(1), pp. 31-45.

Danjou, C., Bled, A., Cousin, N., Roland, T., Perrier, N., Bourgault, M., and Pellerin, R. (2020). Industry 4.0 in construction site logistics: a comparative analysis of research and practice. The Journal of Modern Project Management, Vol 7(4).

Das, A., and Dey, S. (2021). Global manufacturing value networks: assessing the critical roles of platform ecosystems and Industry 4.0. Journal of Manufacturing Technology Management, Vol 32(6), pp. 1290-1311.

Dincer, C., and Dincer, B. (2023). Social Commerce and Purchase Intention: A Brief Look at the Last Decade by Bibliometrics. Sustainability, Vol 15(1), 846. https://doi.org/10.3390/su15010846.

Doetzer, M. and Pflaum, A. (2021), "The role of digitalized information sharing for flexibility capability utilization: lessons from Germany and Japan", International Journal of Physical Distribution and Logistics Management, Vol 51 (2), pp. 181-203.

Donthu, N., Kumar, S., Mukherjee, D., Pandey, N., and Lim, W. M. (2021). How to conduct a bibliometric analysis: An overview and guidelines? Journal of Business Research, Vol 133, pp. 285-296. https://doi.org/10.1016/j.jbusres.2021.04.070

Enrique, D. V., Lerman, L. V., de Sousa, P. R., Benitez, G. B., Santos, F. M. B. C., and Frank, A. G. (2022). Being digital and flexible to navigate the storm: How digital transformation enhances supply chain flexibility in turbulent environments. International Journal of Production Economics, 250, 108668.

Fallahpour, A., Yazdani, M., Mohammed, A. and Wong, K.Y. (2021), "Green sourcing in the era of industry 4.0: towards green and digitalized competitive advantages", Industrial Management and Data Systems, Vol 121 (9), pp. 1997-2025.

Faridi, M. R., and Malik, A. (2020). Digital transformation in supply chain, challenges and opportunities in S.M.E.s: a case study of Al-Rumman Pharma. Emerald Emerging Markets Case Studies, Vol 10(1), pp. 1-16.

Faruquee, M., Paulraj, A. and Irawan, C.A. (2021), "Strategic supplier relationships and supply chain resilience: Is digital transformation that precludes trust beneficial?", International Journal of Operations and Production Management, Vol 41(7), pp. 1192-1219.

Frank, A. G., Dalenogare, L. S., and Ayala, N. F. (2019). Industry 4.0 technologies: Implementation patterns in manufacturing companies. International Journal of Production Economics, Vol 210, pp. 15-26.

Fu, S., Liu, J., Tian, J., Peng, J., and Wu, C. (2023). Impact of Digital Economy on Energy Supply Chain Efficiency: Evidence from Chinese Energy Enterprises. Energies, Vol 16(1), 568.

Fumagalli, S., Mosconi, F., andSaruis, C. (2021). "Recombination" of technologies and new industrial revolution. the case of the reggioemilia mechatronics district. [«ricombiGharaibeh et al., 2022. ione» di tecnologie e nuovarivoluzioneindustriale. Il caso del distrettodellameccatronica di Reggio Emilia] Industria, Vol 42(1), pp. 95-121.

Gharaibeh, L., Eriksson, K., and Lantz, B. (2022). Supply Chain Digitalization in the Wood Manufacturing Industry: A Bibliometric Literature Review. SPS2022, pp. 617-628.

Grill-Kiefer, G., Schröcker, S., Krasser, H., and Körner, S. (2022). DatenbasierteLogistik. Zeitschrift für wirtschaftlichenFabrikbetrieb, Vol 117(4), pp. 234-238.

Gupta, H., Yadav, A. K., Kusi-Sarpong, S., Khan, S. A., and Sharma, S. C. (2022). Strategies to overcome barriers to innovative digitalisation technologies for supply chain logistics resilience during pandemic. Technology in Society, 69, 101970.

Hanaysha, J. R., and Alzoubi, H. M. (2022). The effect of digital supply chain on organizational performance: An empirical study in Malaysia manufacturing industry. Uncertain Supply Chain Management, Vol 10(2), pp. 495-510.

Hartley, J. L., and Sawaya, W. J. (2019). Tortoise, not the hare: Digital transformation of supply chain business processes. Business Horizons, Vol 62(6), pp. 707-715.

Hellweg, F., Lechtenberg, S., Hellingrath, B., and Thomé, A. M. T. (2021). Literature review on maturity models for digital supply chains. Brazilian Journal of Operations and Production Management, Vol 18(3), pp. 1-12.

Holmström, J., Holweg, M., Lawson, B., Pil, F. K., and Wagner, S. M. (2019). The digitalization of operations and supply chain management: Theoretical and methodological implications. Journal of Operations Management, Vol 65(8), pp. 728-734.

Ijuin, H., Kinoshita, Y., Yamada, T., and Ishigaki, A. (2022). Designing Individual Material Recovery in Reverse Supply Chain Using Linear Physical Programming at the Digital Transformation Edge. Journal of Japan Industrial Management Association, Vol 72(4E), pp. 259-271.

Information Resources Management Association. (2021). Research anthology on changing dynamics of diversity and safety in the workforce. Research anthology on cross-industry challenges of industry 4.0. 1-2146

International scientific conference on digital transformation in industry: Trends, management, strategies, 2020. (2021). Paper presented at the Lecture Notes in Information Systems and Organization, 44.

Ivanov, D., Das, A., and Choi, T. M. (2018). New flexibility drivers for manufacturing, supply chain and service operations. International Journal of Production Research, Vol 56(10), pp. 3359-3368.

Ivanov, D., Dolgui, A., and Sokolov, B. (2019). The impact of digital technology and Industry 4.0 on the ripple effect and supply chain risk analytics. International Journal of Production Research, Vol 57(3), pp. 829-846.

Jalui, S. S., Gardi, S., Chityala, D., and Kurian, J. (2019). Predicting ease of implementation of G.S.C.M. Paper presented at the Managing Technology for Inclusive and Sustainable Growth - 28th International Conference for the International Association of Management of Technology, I.A.M.O.T. 2019, pp. 495-514.

Jamwal, A., Agrawal, R., and Sharma, M. (2022). Deep learning for manufacturing sustainability: Models, applications in Industry 4.0 and implications. International Journal of Information Management Data Insights, Vol 2(2), 100107.

Joshi, S. (2013). E-Supply Chain Collaboration and Integration: Implementation Issues and Challenges. In D. Graham, I. Manikas, & D. Folinas (Eds.), E-Logistics and E-Supply Chain Management: Applications for Evolving Business (pp. 9-26). IGI Global. https://doi.org/10.4018/978-1-4666-3914-0.ch002

Joshi, S., & Sharma, M. (2022). Sustainable performance through digital supply chains in industry 4.0 era: amidst the pandemic experience. Sustainability, 14(24), 16726. https://doi.org/10.3390/su142416726.

Joshi, S., Sharma, M., and Barve, A. (2023). Implementation Challenges of Blockchain technology in Closed-loop supply chain: A Waste Electrical and Electronic Equipment (WEEE) Management perspective in developing countries. In Supply Chain Forum: An International Journal (Vol. 24, No. 1, pp. 59-80). Taylor and Francis.

Joshi, S., Sharma, M., Das, R. P., Muduli, K., Raut, R., Narkhede, B. E., ... & Misra, A. (2022). Assessing effectiveness of humanitarian activities against COVID-19 disruption: the role of blockchain-enabled digital humanitarian network (BT-DHN). Sustainability, 14(3), 1904. https://doi.org/10.3390/su14031904.

Junge, A. L. (2018, December). Prospects of Digital Transformation Technologies (DTT) for Sustainable Logistics and Supply Chain Processes in Manufacturing. In International Conference on Production and Operations Management Society, pp. 713-720.

Lalmi, A., Fernandes, G., and Boudemagh, S. S. (2022). Synergy between Traditional, Agile and Lean management approaches in construction projects: bibliometric Analysis. Procedia Computer Science, Vol 196, pp. 732-739. https://doi.org/10.1016/j.procs.2021.12.070

Khalid, B., and Naumova, E. (2021). Digital transformation S.C.M. in view of Covid-19 from Thailand S.M.E.s perspective. Global Challenges of Digital Transformation of Markets, pp. 49-66.

Khan, A. U., and Ali, Y. (2022). Enhancement of resilience and quality of cold supply chain under the disruptions caused by COVID-19: A case of a developing country. Australian Journal of Management, 03128962221095596.

Khan, S. A., Naim, I., Kusi-Sarpong, S., Gupta, H., and Idrisi, A. R. (2021). A knowledge-based experts’ system for evaluation of digital supply chain readiness. Knowledge-Based Systems, 228, 107262.

Kittipanya-Ngam, P., and Tan, K. H. (2020). A framework for food supply chain digitalization: lessons from Thailand. Production Planning and Control, Vol 31(2-3), pp. 158-172.

Kolesnikov, A. V., Chumakova, O. V., Syvorotkina, S. Y., Karsanova, E. S., andSkoblikova, T. V. (2020). Conceptual approaches to implementing the digital supply chain management in some areas of the Russian economy. International Journal of Supply Chain Management, pp. 1074-1080.

Kumar, R., Rehman, U. U., andPhanden, R. K. (2022). Strengthening the social performance of indian S.M.E.s in the digital era: A fuzzy D.E.M.A.T.E.L. analysis of enablers. TQM Journal, doi:10.1108/TQM-06-2022-0193

Kurpjuweit, S., Schmidt, C. G., Klöckner, M., and Wagner, S. M. (2021). Blockchain in additive manufacturing and its impact on supply chains. Journal of Business Logistics, Vol 42(1), pp. 46-70.

Lamdasni, Y., and Okar, C. (2020, December). Abilities for a successful maintenance digital transformation: A case study of a Moroccan company. In 2020 IEEE 13th International Colloquium of Logistics and Supply Chain Management (LOGISTIQUA), pp. 1-6.

Lee, C. H., and Rhee, B. D. (2021). Retailer-run resale market and supply chain coordination. International Journal of Production Economics, 235, 108089.

Lerman, L. V., Benitez, G. B., Müller, J. M., de Sousa, P. R., and Frank, A. G. (2022). Smart green supply chain management: a configurational approach to enhance green performance through digital transformation. Supply Chain Management: An International Journal, Vol 27(7), pp. 147-176.

Linnenluecke, M. K., Marrone, M., and Singh, A. K. (2020). Conducting systematic literature reviews and bibliometric analyses. Australian Journal of Management, Vol 45(2), pp. 175-194. https://doi.org/10.1177/0312896219877678

Liu, Z., Hansen, D. W., and Chen, Z. (2023). Leveraging Digital Twins to Support Industrial Symbiosis Networks: A Case Study in the Norwegian Wood Supply Chain Collaboration. Sustainability, Vol 15(3), 2647.

Liu, X., Sun, R., Wang, S. and Wu, Y.J. (2020), "The research landscape of big data: a bibliometric analysis", Library Hi Tech, Vol. 38 No. 2, pp. 367-384. https://doi.org/10.1108/LHT-01-2019-0024.

Lyu, M., Biennier, F., andGhodous, P. (2021). Integration of ontologies to support Control as a Service in an Industry 4.0 context. Service Oriented Computing and Applications, Vol 15(2), pp. 127-140.

Maltagliati, M. S., Lagorio, A., and Pinto, R. (2020). Digital supply chain characterization: A review of the definition and main benefits. In 25th Summer School Francesco Turco, 2020, N-A. AIDI-Italian Association of Industrial Operations Professors.

Mathushan, P., Gamage, A. S., and Thero, V. W. (2022). Role of Big Data in Human Resource Management: A Review and Bibliometric Analysis. Kelaniya Journal of Human Resource Management, Vol 17(2). DOI: http://doi.org/10.4038/kjhrm.v17i2.114

Matthess, M., and Kunkel, S. (2020). Structural change and digitalization in developing countries: Conceptually linking the two transformations. Technology in society, 63, 101428.

Merigó, J. M., Cancino, C. A., Coronado, F., and Urbano, D. (2016). Academic research in innovation: a country analysis. Scientometrics, Vol 108, pp. 559-593. https://doi.org/10.1007/s11192-016-1984-4.

Menon, S., and Shah, S. (2020, November). Growth of Digital Supply Chains for S.M.E. Transformation. In 2020 IEEE International Conference on Technology Management, Operations and Decisions (I.C.T.M.O.D.), 1-6.

Missbauer, H., Battini, D., Trautrims, A., and Tseng, M. L. (2022). Advances in Production Economics. International Journal of Production Economics, pp. 108498.

Mondadori, J. A., Belderrain, M. C. N., Ferreira, R. J. P., andFrançozo, R. V. (2021, December). Manufacturing Execution System Selection by Use of Multicriteria Partial Information Method. In Innovation for Systems Information and Decision Meeting, pp. 87-99.

Natarajan, G., Ng, E. H., and Katina, P. F. (2021). blockchain technology and digital supply chains: towards revolutionizing the industry of the Future.

Nakandala, D., Yang, R., Lau, H., and Weerabahu, S. (2023). Industry 4.0 technology capabilities, resilience and incremental innovation in Australian manufacturing firms: a serial mediation model. Supply Chain Management: An International Journal, (ahead-of-print).

Nayal, K., Kumar, S., Raut, R. D., Queiroz, M. M., Priyadarshinee, P., andNarkhede, B. E. (2022). Supply chain firm performance in circular economy and digital era to achieve sustainable development goals. Business Strategy and the Environment, Vol 31(3), pp. 1058-1073.

Nayal, K., Raut, R. D., Yadav, V. S., Priyadarshinee, P., andNarkhede, B. E. (2022). The impact of sustainable development strategy on sustainable supply chain firm performance in the digital transformation era. Business Strategy and the Environment, Vol 31(3), pp. 845-859.

Nazzal, A., Sánchez-Rebull, M.-V. and Niñerola, A. (2023), "Foreign direct investment by multinational corporations in emerging economies: a comprehensive bibliometric analysis", International Journal of Emerging Markets, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/IJOEM-12-2021-1878

Nica, E. (2019). Cyber-physical production networks and advanced digitalization in industry 4.0 manufacturing systems: sustainable supply chain management, organizational resilience, and data-driven innovation. Journal of Self-Governance and Management Economics, Vol 7(3), pp. 27-33.

Nudurupati, S. S., Budhwar, P., Pappu, R. P., Chowdhury, S., Kondala, M., Chakraborty, A., and Ghosh, S. K. (2022). Transforming Sustainability of Indian small and medium-sized enterprises through circular economy adoption. Journal of Business Research, Vol 149, pp. 250-269.

Ojo, O. O., Zigan, S., Orchard, J., and Shah, S. (2019, June). Advanced technology integration in food manufacturing supply chain environment: pathway to Sustainability and companies' prosperity. In 2019 IEEE Technology and Engineering Management Conference (T.E.M.S.C.O.N.), pp. 1-7.

Pandey, S., Singh, R. K., and Gunasekaran, A. (2021). Supply chain risks in Industry 4.0 environment: review and analysis framework. Production Planning and Control, pp. 1-28.

Pause, D., Holtkemper, D., Kraut, A., Marek, S., Janßen, J., Linnartz, M., and Schmitz, S. (2020). Supply-chain-management 4.0. Zeitschrift für wirtschaftlichenFabrikbetrieb, Vol 115(5), pp. 318-320.

Pessot, E., Zangiacomi, A., Battistella, C., Rocchi, V., Sala, A. and Sacco, M. (2021), "What matters in implementing the factory of the future: Insights from a survey in European manufacturing regions", Journal of Manufacturing Technology Management, Vol 32(3), pp. 795-819.

Prakash, S., Joshi, S., Bhatia, T., Sharma, S., Samadhiya, D., Shah, R. R.& Prasad, M. (2020). Characteristic of enterprise collaboration system and its implementation issues in business management. International Journal of Business Intelligence and Data Mining, 16(1), 49-65. https://doi.org/10.1504/IJBIDM.2020.103853.

Princes, E. (2020). Integrating ambidexterity into the modern manufacturing era of industry 4.0. Int. J. Supply Chain Manag, Vol 9(4), pp. 58-64.

Priyadarshini, J., Singh, R. K., Mishra, R., and Bag, S. (2022). Investigating the interaction of factors for implementing additive manufacturing to build an antifragile supply chain: TISM-MICMAC approach. Operations Management Research, pp. 1-22.

Pylaeva, I. S., Podshivalova, M. V., Alola, A. A., Podshivalov, D. V., and Demin, A. A. (2022). A new approach to identifying high-tech manufacturing S.M.E.s with sustainable technological development: Empirical evidence. Journal of Cleaner Production, 363, 132322.

Rasool, F., Greco, M., and Grimaldi, M. (2022). Digital supply chain performance metrics: a literature review. Measuring Business Excellence, Vol 26(1), pp. 23-38.

Rabaia, M. K. H., Semeraro, C., andOlabi, A. G. (2022). Recent progress towards photovoltaics’ circular

Ribeiro, V. H., Barata, J., and Cunha, P. R. (2021, September). Business Process Improvement in Industry 4.0: An Interorganizational Perspective. In International Conference on Business Process Management ,286-298. economy. Journal of Cleaner Production, 133864.

Reis, M. A., Minerbo, C., and Miguel, P. L. (2021). S.C.M. professionals' competences in Brazil. Brazilian Journal of Operations and Production Management, Vol 18(4), pp. 1-17.

Rocha, C. F., Quandt, C. O., and Deschamps, F. (2022). Digital Supply Chain Insights from Large Factories: How Intercollaborations Accelerate Digitalization. In Increasing Supply Chain Performance in Digital Society, pp. 153-178.

Rojas-Sánchez, M. A., Palos-Sánchez, P. R., and Folgado-Fernández, J. A. (2023). Systematic literature review and bibliometric Analysis on virtual reality and education. Education and Information Technologies, Vol 28(1), pp. 155-192. https://doi.org/10.1007/s10639-022-11167-5

Rossini, M., Costa, F., Tortorella, G. L., Valvo, A., andPortioli-Staudacher, A. (2021). Lean Production and Industry 4.0 integration: how Lean Automation is emerging in manufacturing industry. International Journal of Production Research, pp. 1-21.

Roth, S., and Nikolla, A. (2020). Vorgehenzurerstellungeinerdigitalisierungsroadmap für das supply-chain-management. Zeitschrift für wirtschaftlichenFabrikbetrieb, Vol 115(9), pp. 634-640.

10. Ahmed Khan, S. Kusi-Sarpong, H. Gupta, F. Kow Arhin, J. Nguseer Lawal and S. Mehmood Hassan, "Critical Factors of Digital Supply Chains for Organizational Performance Improvement," in IEEE Transactions on Engineering Management, doi: 10.1109/TEM.2021.3052239.

Sáez-Ortuno, L., Forgas-Coll, S., Huertas-Garcia, R., and Sánchez-García, J. (2023). What's on the horizon? A bibliometric analysis of personal data collection methods on social networks. Journal of Business Research, 158, 113702. https://doi.org/10.1016/j.jbusres.2023.113702

Saengchai, S., andJermsittiparsert, K. (2019). Supply chain in digital era: Role of I.T. infrastructure and trade digitalization in enhancing supply chain performance. International Journal of Supply Chain Management, Vol 8(5), pp. 697-707.

Sahu, A., Agrawal, S. and Kumar, G. (2022), "Integrating Industry 4.0 and circular economy: a review", Journal of Enterprise Information Management, Vol 35(3), pp. 885-917.

Schollemann, A., Wiesch, M., Brecher, C., and Schuh, G. (2022). Resilience Drivers in Next Generation Manufacturing. In Forecasting Next Generation Manufacturing, pp. 119-128.

Schumacher, J. (2018). Knowledge is power – what get in the way of digitalisation. [Wissen isttrumpf − was der digitalisierungnochimwegesteht: Ergebnisse der perfect production umfrage in 2017 zurnutzung von industrie 4.0-modellen] Productivity Management, Vol 23(1), pp. 16-18.

Seyedghorban, Z., Tahernejad, H., Meriton, R., and Graham, G. (2020). Supply chain digitalization: past, present and Future. Production Planning and Control, Vol 31(2-3), pp. 96-114.

Shah, S., Menon, S., Ojo, O. O., and Ganji, E. N. (2020, November). Digitalisation in Sustainable Manufacturing–A Literature Review. In 2020 IEEE International Conference on Technology Management, Operations and Decisions (I.C.T.M.O.D.), pp. 1-6.

Shaposhnikov, S., and Veselova, A. (2022). Supply Chain and Digital Transformation in Japan. In Increasing Supply Chain Performance in Digital Society, 44-58. I.G.I. Global.

Sharma, V. K., Sachdeva, A., and Singh, L. P. (2021). A meta-analysis of sustainable supply chain management from different aspects. International Journal of Supply and Operations Management, Vol 8(3), pp. 289-313.

Sharma, M., and Joshi, S. (2023). Digital supplier selection reinforcing supply chain quality management systems to enhance firm's performance. The TQM Journal, Vol 35(1), pp. 102-130.

Sharma, M., Kumar, A., Luthra, S., Joshi, S., and Upadhyay, A. (2022). The impact of environmental dynamism on low‐carbon practices and digital supply chain networks to enhance sustainable performance: An empirical analysis. Business Strategy and the Environment, Vol 31(4), pp. 1776-1788.

Shen, X., Zhang, Y., Tang, Y., Qin, Y., Liu, N. and Yi, Z. (2022), "A study on the impact of digital tobacco logistics on tobacco supply chain performance: taking the tobacco industry in Guangxi as an example", Industrial Management and Data Systems, Vol 122 (6), pp. 1416-1452.

Shetty, D., and Henderson, S. B. (2019). Emerging trends in industry 4.0 with innovative case study of human balance and rehabilitation engineering. In Proceedings of the International Conference on Industrial Engineering and Operations Management, pp. 1427-1428.

Shi, Y., Zheng, X., Venkatesh, V.G., Humdan, E.A. and Paul, S.K. (2023), "The impact of digitalization on supply chain resilience: an empirical study of the Chinese manufacturing industry", Journal of Business and Industrial Marketing, Vol 38(1), pp. 1-11.

Simonetto, M., Sgarbossa, F., Battini, D., and Govindan, K. (2022). Closed loop supply chains 4.0: From risks to benefits through advanced technologies. A literature review and research agenda. International Journal of Production Economics, 108582.

Somjai, S., Vasuvanich, S., Laosillapacharoen, K., andSuteerachai, B. (2019). Governing role of trade digitalization in global supply chain finance, negotiation and S.M.E.s performance. International Journal of Supply Chain Management, Vol 8(5), 660.

Sommanawat, K., Vipaporn, T., and Joemsittiprasert, W. (2019). Can Big Data Benefits Bridge Between Data Driven Supply Chain Orientation and Financial Performance? Evidence from Manufacturing Sector of Thailand. International Journal of Supply Chain Management, Vol 8(5), 597.

Song, M., Ma, X., Zhao, X. and Zhang, L. (2022), "How to enhance supply chain resilience: a logistics approach", The International Journal of Logistics Management, Vol 33(4), pp. 1408-1436.

Srivastava, S., Bhadauria, A., Dhaneshwar, S., and Gupta, S. (2019). Traceability and transparency in supply chain management system of pharmaceutical goods through block chain. Int. J. Sci. Technol. Res, Vol 8(12), pp. 3201-12306.

Strandhagen, J. W., Buer, S. V., Semini, M., Alfnes, E., andStrandhagen, J. O. (2022). Sustainability challenges and how Industry 4.0 technologies can address them: A case study of a shipbuilding supply chain. Production Planning and Control, Vol 33(9-10), pp. 995-1010.

Strljic, M. M., Riedel, O., and Lechler, A. (2019, July). Collective cloud manufacturing for maintaining diversity in production through digital transformation. In 2019 IEEE 21st Conference on Business Informatics (C.B.I.), Vol. 1, pp. 594-603. IEEE.

Surajit, B., andTelukdarie, A. (2018, December). Business logistics optimization using industry 4.0: current status and opportunities. In 2018 IEEE International Conference on Industrial Engineering and Engineering Management (I.E.E.M.), pp. 1558-1562. IEEE.

Supranee, S., and Rotchanakitumnuai, S. (2017). The acceptance of the application of block chain technology in the supply chain process of the Thai automotive industry.

Susanti, M., and Reza, H. K. (2023). A Bibliometric and Visualized Analysis of Digital Payment 2019-2021. International Journal of Intelligent Systems and Applications in Engineering, Vol 11(2), pp. 112-118. Retrieved from https://www.ijisae.org/index.php/IJISAE/article/view/2601

Szopa, Ł., andCyplik, P. (2020). The concept of building a digital transformation model for enterprises from the S.M.E. sector. LogForum, Vol 16(4).

Tan, C.L., Tei, Z., Yeo, S.F., Lai, K.-H., Kumar, A. and Chung, L. (2022), "Nexus among blockchain visibility, supply chain integration and supply chain performance in the digital transformation era", Industrial Management and Data Systems, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/IMDS-12-2021-0784

Thomay, C., Bodin, U., Isakovic, H., Lasch, R., Race, N., Schmittner, C., ... and Wang, Z. (2022, April). Towards Adaptive Quality Assurance in Industrial Applications. In N.O.M.S. 2022-2022 IEEE/IFIP Network Operations and Management Symposium, 1-6. IEEE.

Veile, J. W., Schmidt, M. -., Bauer, J. C., and Voigt, K. -. (2021). Hitting three birds with one stone: interrelations of sustainability dimensions in industry 4.0. Paper presented at the Proceedings of the 30th International Conference of the International Association for Management of Technology, I.A.M.O.T. 2021 - M.O.T. for the World of the Future, pp. 207-223.

Wasiq, M., Bashar, A., Akmal, S., Rabbani, M. R., Saifi, M. A., Nawaz, N., and Nasef, Y. T. (2023). Adoption and Applications of Blockchain Technology in Marketing: A Retrospective Overview and Bibliometric Analysis. Sustainability, Vol 15(4), 3279. https://doi.org/10.3390/su15043279

10. R. Ho, N. Tsolakis, T. Dawes, M. Dora and M. Kumar, "A Digital Strategy Development Framework for Supply Chains," in IEEE Transactions on Engineering Management, doi: 10.1109/TEM.2021.3131605.

Weerabahu, W. S. K., Samaranayake, P., Nakandala, D., andHurriyet, H. (2021, December). Enabling Factors of Digital Manufacturing Supply Chains: A Systematic Literature Review. In 2021 IEEE International Conference on Industrial Engineering and Engineering Management (I.E.E.M.), pp. 118-123.

Weking, J., Stöcker, M., Kowalkiewicz, M., Böhm, M., and Krcmar, H. (2020). Leveraging industry 4.0–A business model pattern framework. International Journal of Production Economics, 225, 107588.

WESTBROEK, A. (2022, May). Exploring Data-Driven Decision-Making for Enhanced Sustainability. In SPS2022: Proceedings of the 10th Swedish Production Symposium, 21, 392. IOS Press.

Xin, L., Lang, S., and Mishra, A. R. (2022). Evaluate the challenges of sustainable supply chain 4.0 implementation under the circular economy concept using new decision making approach. Operations Management Research, pp. 1-20

Yang, M., Fu, M., and Zhang, Z. (2021). The adoption of digital technologies in supply chains: Drivers, process and impact. Technological Forecasting and Social Change, 169, 120795.

Yıldız, G. B. (2021). Turkey: Enhancing social partners’ capacity and social dialogue in the new world of work. In The New World of Work. pp. 491-527.

Yu, Y., Zhang, J. Z., Cao, Y., andKazancoglu, Y. (2021). Intelligent transformation of the manufacturing industry for Industry 4.0: Seizing financial benefits from supply chain relationship capital through enterprise green management. Technological Forecasting and Social Change, 172, 120999.

Yu, Z., Khan, S. A. R., and Umar, M. (2022). Circular economy practices and industry 4.0 technologies: A strategic move of automobile industry. Business Strategy and the Environment, Vol 31(3), pp. 796-809.

Zaki, M., Theodoulidis, B., Shapira, P., Neely, A., and Tepel, M. F. (2019). Redistributed manufacturing and the impact of big data: a consumer goods perspective. Production planning and control, Vol 30(7), pp. 568-581.

Zangiacomi, A., Pessot, E., Fornasiero, R., Bertetti, M., and Sacco, M. (2020). Moving towards digitalization: a multiple case study in manufacturing. Production Planning and Control, Vol 31(2-3), pp. 143-157.

Zangiacomi, A., Sacco, M., Pessot, E., De Zan, A., and Bertetti, M. (2018, June). A perspective for the implementation of a path towards the factory of the Future: The Italian case. In 2018 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC) (pp. 1-9). IEEE.