Towards Identification of the Hierarchical Link between Industry 4.0, Smart Manufacturing and Smart Factory: Concept Cross-Comparison and Synthesis

Document Type : FORBS 2019

Authors

1 a Laboratory of Information Technology and Communications, International University of Rabat, Sala Al Jadida, Morocco

2 Laboratory Engineering Science, MOSIL Team, ENSA Kénitra, Morocco

Abstract

The industrial sector has historically been linked to the prosperity, development and evolution of nations, hence to the genesis of the philosophy of competitiveness, mainly at the manufacturing level. An environment is in perpetual adaptation to trends, and the best example is the change of industrial ideology, as was the case in the past. The global society is facing the same challenges. Customer demands are becoming more and more specific and personalized, which means that factories have to innovate in terms of production and management of mudas in an eco-environmental context closely followed by several global organizations. Information and communication technologies have become the joker to master in order to stay in a market that is global and very competitive. At the heart of this evolution is the emergence of the Industry 4.0 concept, which includes a key element that is intelligent production in factories of the future that can meet different obstacles. The purpose of the current research on one hand is to highlight the relation between I4.0, smart manufacturing and smart factory, and on the other hand to present a synthesis of Industry 4.0 national initiatives linked to the fourth industrial revolution worldwide.

Keywords

Main Subjects

References

Agnieszka Radziwon, Arne Bilberg, Marcel Bogers, Erik Skov Madsen, (2014). The Smart Factory: Exploring Adaptive and Flexible Manufacturing Solutions, 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, Procedia Engineering, Vol. 69, pp. 1184-1190.
 
Alan Alves Pereira and Fernando Romero, (2017). A Review of the meanings and the implications of the Industry 4.0 concept, Manufacturing Engineering Society International Conference, Vol.13, pp. 1206-1214.
 
Alasdair Gilchrist, (2016). Designing Industrial Internet Systems. In: Industry 4.0. Apress, Berkeley,CA.
 
Alejandro Germán Frank, (2019). Industry 4.0 technologies: implementation patterns in manufacturing companies, International Journal of Production Economics, in press.
 
Andrew Kusiak (2017), Smart Manufacturing, International Journal of Production Research, Vol. 56, (No. 1-2), pp. 508-517.
 
Andrew Kusiak, (2017). Smart manufacturing must embrace big data, Springer Nature, International Weekly Journal of Science, Vol. 544. pp. 23-25.
 
Arnesh Telukdarie, Eyad Buhulaiga, Surajit Bag, Shivam Gupta, Zongwei Luo, (2018). Industry 4.0 implementation for multinationals, Process Safety and Environmental Protection,Vol. 118, pp 316-329.
 
Chiara Cimini , Giuditta Pezzotta, Roberto Pinto, Sergio Cavalieri, (2019). Industry 4.0 Technologies Impacts in the Manufacturing and Supply Chain Landscape: An Overview Service Orientation in Holonic and Multi-Agent Manufacturing. SOHOMA 2018, Studies in Computational Intelligence, Vol. 803. pp. 109-120. Springer.
 
Christoph Herrmann, Christopher Schmidt, Denis Kurle, Stefan Blume, Sebastian Thiede, (2014). Sustainability in Manufacturing and Factories of the Future, International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1 (No. 4), pp. 283-292.
 
Council of Deloitte 2016 Global Manufacturing Competitiveness Index.
 
Craig A. Giffi, Paul Wellener, Ben Dollar, Heather Ashton Manolian, Luke Monck, Chad Moutray(2018).The jobs are here, but where are the people?,  Deloitte and The Manufacturing Institute skills gap and future of work study.
 
Daniele Miorandi, Sabrina Sicari, Francesco De Pellegrini and Imrich Chlamtac (2012). Internet of things: Vision, applications and research challenges, Ad Hoc Networks, Vol. 10 (No.7), pp. 1497-1516.
 
Dazhong Wu, David W. Rosen, Dirk Schaefer, (2014). Cloud-Based Design and Manufacturing: Status and Promise, Cloud-Based Design and Manufacturing. Vol. 59 (No. 1), pp. 1-24.
 
Eleonora Borgia, (2014). The Internet of Things vision: Key features, applications and open issues, Computer Communications, Vol.  54, pp. 1-31.
 
Fabian Hecklau, Mila Galeitzke, Sebastian Flachs and Holger Kohl,(2016). Holistic approach for human resource management in Industry 4.0, 6th CIRP Conference on Learning Factories, Vol. 54, pp. 1-6.
 
Fei Tao, Jiangfeng Cheng, Qinglin Qi, Meng Zhang, He Zhang and Fangyuan Sui (2018). Digital twin-driven product design, manufacturing and service with big data, The International Journal of Advanced Manufacturing Technology, Vol. 94, pp. 3563-3576.
 
František Zezulka, Petr Marcon,Vesely, Sajdl (2016). An Introduction in the phenomenon, International Federation of Automatic Control, IFAC conference paper, Vol. 49(25), pp. 8-12.
 
Henk Zijm, (2000) ,Towards intelligent manufacturing planning and control systems, OR Spektrum, Vol. 22(3), pp.313-345.
 
Henning Kagermann, Wolfgang Wahlster, Johannes Helbig, Ariane Hellinger (2013). Recommendations for implementing the strategic initiative INDUSTRIE 4.0, Final report of the Industrie 4.0 Working Group. Vol. 4. pp. xx-xx.
 
Hermann Mario, Tobias Pentek, Boris Otto (2016). Design Principles for Industrie 4.0 Scenarios: A Literature Review, 49th Hawaii International Conference on System Sciences, Working paper, pp. 1-15.
 
IEEE Special Section 2019, Key Technologies for Smart Factory of Industry 4.0, Vol. 7.
 
Jay Lee, Behrad Bagheri, Hung An Kao (2015). A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems, Manufacturing Letters, Vol. 3, pp. 18-23.
 
Jay Lee, Hung An Kao and Shanhu Yang (2014). Service Innovation and smart analytics for Industry 4.0 and big data environment, 6th CIRP Conference on Industrial Product-Service Systems, Vol. 16, pp. 3-8.
 
Jinjiang Wang, Yulin Ma, Laibin Zhang, Robert X. Gao, Dazhong Wu (2018). Deep learning for smart manufacturing: Methods and applications, Journal of Manufacturing Systems, Vol. 48(C), pp.144-156.
 
Jochen Schlick, Peter Stephan, Matthias Loskyll, Dennis Lappe, (2017). Industry 4.0 in practical application, Manual Industrie 4.0 Bd.2. Springer Reference Technique Heidelberg, pp. 3-29.
 
Keliang Zhou, Taigang Liu, Lifeng Zhou (2016). Industry 4.0: Towards future industrial opportunities and challenges, 12th International conference on Fuzzy Systems and Knowledge Discovery, pp 2147-2152. 
 
Klaus Helmrich (2019).Future technologies that will drive Industry 4.0, World Economic Forum, Global Competitiveness Report 2019.
 
Lihui Wang, Martin Törngren and Mauro Onori (2015). Current status and advancement of cyber-physical systems in manufacturing, Journal of Manufacturing Systems, Vol. 37(2), pp. 517-527.
 
Ling Li, (2018). China ‘Manufacturing Locus in 2025: With a comparison of "Made in China 2025" and Industry 4.0”, Technological Forecasting and Social Change, Vol. 135, pp. 66-74.
 
Loic Tassel, President, Europe, Procter & Gamble (2019), Why strive for Industry 4.0, Economic Forum.
 
Paul Wellener, (2019).  My take, Industrial manufacturing industry outlook, Deloitte Report.
 
Peng Wang, Robert X. Gao and Zhaoyan Fan, (2015). Cloud Computing for Cloud Manufacturing: Benefits and Limitations, Journal of Manufacturing Science and Engineering, Vol. 137, pp. 401-409.
 
Rainer Schmidt, Michael Möhring Ralf-Christian Härting, Christopher Reichstein, Pascal Neumaier, Philip Jozinović, (2015). Industry 4.0 - Potentials for Creating Smart Products:
Empirical Research Results, 18th International Conference on Business Information Systems, pp. 16-27.
 
Ray Y. Zhong, Xun Xu, Eberhard Klotz, Stephen T.Newman (2017). Intelligent Manufacturing in the Context of Industry 4.0: A Review, Engineering Elsevier Journal, Vol. 3 (No. 5), pp. 616-630.
 
Sabina Jeschke, Christian Brecher, Tobias Meisen, (2017). Industrial Internet of Things and Cyber Manufacturing Systems, Industrial Internet of Things. Springer Series in Wireless Technology. Springer. pp. 3-19.
 
Sameer Mittal, Muztoba Ahmad Khan, David Romero, Thorsten Wuest (2019). Smart manufacturing: Characteristics, technologies and enabling factors, Journal of Engineering Manufacture, Vol. 233(5), pp. 1342-1361.
 
Sarah El Hamdi, Abdellah Abouabdellah and Mustapha Oudani (2019). Industry 4.0: Fundamentals and Main Challenges, Logistiqua, in press.
 
Selim Erol, Andreas Jäger, Philip Hold, Karl Ott and Wilfried Sihn(2016). Tangible industry 4.0: a scenario-based approach to learning for the future of production, 6th CIRP Conference on Learning Factories, Vol. 54, pp. 13-18.
 
Shiyong Wang, Jiafu Wan, Di Li, Chunhua Zhang, (2016). Implementing Smart Factory of Industrie 4.0: An Outlook, International Journal of Distributed Sensor Networks, Vol. 12(1), pp. 1-10.
 
Stephen J. Ezell, Robert D. Atkinson, Inchul Kim, Jaehan Cho, (2018). Manufacturing Digitalization: Extent of Adoption and Recommendations for Increasing Penetration in Korea and the U.S., Information Technology & Innovative Foundation.
 
Yasuyuki Nishioka (2019). President of the Industrial Value Chain Initiative, Connected Industries Open Framework for Manufacturing Basic Specification and System Requirement, Industrial Value Chain Initiative Project for open data framework on smart manufacturing platforms, pp. 1-70.
 
Yongxin Liao, Eduardo Rocha Loures, Fernando Deschamps, Guilherme Brezinski, André Venâncio (2018). The impact of the fourth industrial revolution: a cross-country/region comparison, Production, Vol. 28. 
 
Yongxin Liao, Fernando Deschamps, Eduardo de Freitas Rocha Loures and Luiz Felipe Pierin Ramos, (2017) Past, Present and Future of Industry 4.0: a systematic literature review research agenda proposal, International Journal of Production Research,.Vol. 55 (12), pp. 3609-3629.
 
Yuqian Lu, Xun Xu and Jenny Xu, (2014). Development of a Hybrid Manufacturing Cloud, Journal of Manufacturing Systems, Vol. 33(4), pp. 551-566.
International Journal of Supply and Operations Management
Volume 6, Issue 3 - Serial Number 3
August 2019
Pages 231-244

Files

Share

How to cite

Statistics