Development of an Integrated Model for Maintenance Planning and Statistical Process Control

Rasay, Hasan; Fallahnezhad, Mohammad Saber; Zaremehrjerdi, Yiahia

doi:10.22034/2018.2.4

Development of an Integrated Model for Maintenance Planning and Statistical Process Control

Document Type : Research Paper

Authors

Department of Industrial Engineering, Yazd University, Yazd, Iran

10.22034/2018.2.4

Abstract

An integrated model of maintenance planning and statistical process control is developed for a production process. The process has two operational states including an in-control state and an out-of-control state, where the process failure mechanism is supposed as a general continuous distribution with non-decreasing failure rate. Based on the information obtained from the control chart, three types of maintenance actions may be implemented on the process. The integrated model optimally determines the parameters of the control chart and maintenance actions so that the expected cost per time unit is minimized. To evaluate the performance of the integrated model, a stand-alone model is developed. In the stand-alone model, only maintenance planning is considered. Finally, a real case study is presented to clarify the performances of these models.

Keywords

Main Subjects

maintenance engineering & management

References

Abouei Ardakan, Mostafa, Ali Zeinal Hamadani, Mohammad Sima, and Mohammad Reihaneh. (2016). A Hybrid Model for Economic Design of MEWMA Control Chart under Maintenance Policies. The International Journal of Advanced Manufacturing Technology, Vol. 83(9–12), pp. 2101–2110.

Ben Daya.M, and Rahim.M.A. (2000). Effect of Maintenance on the Economic Design of X -Bar Control Chart. European Journal of Operational Research, Vol. 120, pp. 131–143.

Charongrattanasakul, P., and A. Pongpullponsak. (2011). Minimizing the Cost of Integrated Systems Approach to Process Control and Maintenance Model by EWMA Control Chart Using Genetic Algorithm. Expert Systems with Applications, Vol. 38 (5), pp. 5178–5186.

Jianlan Zhong and Yizhong Ma. (2017). An Integrated Model Based on Statistical Process Control and Maintenance for Two-Stage Dependent Processes. Communications in Statistics - Simulation and Computation, Vol. 46 (1), pp. 106–126.

Khaleghei, Akram, Ghosheh Balagh, Viliam Makis, and Leila Jafari. (2014). An Optimal Bayesian Maintenance Policy for a Partially Observable System Subject to Two Failure Modes. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol. 8 (9), Vol. 1538–1542.

Linderman, Kevin, Kathleen E. McKone-Sweet, and John C. Anderson. (2005). An Integrated Systems Approach to Process Control and Maintenance. European Journal of Operational Research, Vol. 164 (2), pp. 324–340.

Liu, Liping, Lining Jiang, and Ding Zhang. (2017). An Integrated Model of Statistical Process Control and Condition-Based Maintenance for Deteriorating Systems. Journal of the Operational Research Society. Palgrave Macmillan UK, pp. 1–9.

Liu, Liping, Miaomiao Yu, Yizhong Ma, and Yiliu Tu. (2013). Economic and Economic-Statistical Designs of an X-Bar Control Chart for Two-Unit Series Systems with Condition-Based Maintenance. European Journal of Operational Research, Vol. 226 (3), pp. 491–499.

Munford, A.G. (1981). Comparison among Certain Inspection Policies. Management Science, Vol. 27 (3), pp. 260–267.

Panagiotidou, S., and G. Tagaras. (2012). Optimal Integrated Process Control and Maintenance under General Deterioration. Reliability Engineering and System Safety, Vol. 104, pp. 58–70.

Panagiotidou, Sofia, and George Nenes. (2009). An Economically Designed, Integrated Quality and Maintenance Model Using an Adaptive Shewhart Chart. Reliability Engineering and System Safety, Vol. 94 (3), pp. 732–741.

Panagiotidou, Sofia, and George Tagaras. (2010). Statistical Process Control and Condition-Based Maintenance : A Meaningful Relationship through Data Sharing. Prodiction and Operations Management, Vol. 19 (2), pp. 156–171.

Rasay, H., M.S. Fallahnezhad, and Y. Zaremehrjerdi. (2018). Application of Multivariate Control Charts for Condition Based Maintenance. International Journal of Engineering, Transactions B: Applications, Vol. 31 (4), pp. 597-604.

Rasay, Hasan, Mohammad Saber Fallahnezhad, and Yahia Zare Mehrjerdi. (2018). An Integrated Model for Economic Design of Chi-Square Control Chart and Maintenance Planning. Communications in Statistics - Theory and Methods, Vol. 47 (12), pp. 2892–2907.

Rasay, Hassan, Mohammad Saber Fallahnezhad, and Yahia Zaremehrjerdi. (2018). Integration of the Decisions Associated with Maintenance Management and Process Control for a Series Production System. Iranian Journal of Management Studies, Vol. 11 (2), pp. 379–405.

Tagaras, George. (1988). An Integrated Cost Model for the Joint Optimization of Process Control and Maintenance. Journal of the Operational Research Society, Vol. 39 (8), pp. 757–766.

Wu, Jianmou, and Viliam Makis. (2008). Economic and Economic-Statistical Design of a Chi-Square Chart for CBM.” European Journal of Operational Research, Vol. 188 (2), pp. 516–529.

Xiang, Yisha. (2013). Joint Optimization of X -Bar Control Chart and Preventive Maintenance Policies : A Discrete-Time Markov Chain Approach.” European Journal of Operational Research, Vol. 229 (2). pp. 382–390.

Yin, Hui, Guojun Zhang, Haiping Zhu, Yuhao Deng, and Fei He. (2015). An Integrated Model of Statistical Process Control and Maintenance Based on the Delayed Monitoring. Reliability Engineering and System Safety, Vol. 133, pp. 323–333.

Zhou, Wen-hui, and Gui-long Zhu. (2008). Economic Design of Integrated Model of Control Chart and Maintenance Management. Mathematical and Computer Modeling, Vol. 47, pp. 1389–1395.